Chlorine Manufacturer ForHome® For Softeners With Titanium Electrode, F 3/8 "With Transformer

SKU: 15000407 
Chlorine Manufacturer ForHome® For Softeners With Titanium Electrode, F 3/8 "With Transformer
  • Chlorine Manufacturer ForHome® For Softeners With Titanium Electrode, F 3/8 "With Transformer
  • Chlorine Manufacturer ForHome® For Softeners With Titanium Electrode, F 3/8 "With Transformer
Price:
€116.62
You Save: 41% €198.25
FREE shipping€ 5,99
Free from € 15,00
starting from € 6.00 (see exceptions)
Not available Lowq Medium High 0

Product is out of stock
TEL. 0773 848566
WhatsApp
No video available for this product

CHLORINE MANUFACTURER WITH TITANIUM ELECTRODES

Mod. CHLO ACTIVE CL2

complete with titanium electrode, O-ring, Starfit fittings 3/8 "

 

Suitable for 0 - 80 l resin softeners

 

OPERATION:

Connect the probe to the brine suction line of your softener (using the appropriate adapters). Check how many liters of resin are contained in your softener (see softener instruction manual). Make sure that the electric plug of our generator is disconnected. On the generator there is a trimmer that regulates clockwise from 1 to 70 minutes of timer. Each programmed minute is able to disinfect 1 liter of resin. The system is ready to operate.

How does it work:

during regeneration the softener sucks the brine, the system senses the passage of brine and activates the electrolysis of NaCl for the time set directly on the probe. At the end of this time, the generator is silent for 4 hours (ignores any brine passage). After 4 hours the system is ready to be able to disinfect the resins again. The green led indicates system in tension, the yellow led indicates system in disinfection.

** THE PICTURE SHOWS THE 2 VERSIONS (DEPENDING ON AVAILABILITY)

Full descriptionClose description
×
Description

CHLORINE MANUFACTURER WITH TITANIUM ELECTRODES

Mod. CHLO ACTIVE CL2

complete with titanium electrode, O-ring, Starfit fittings 3/8 "

 

Suitable for 0 - 80 l resin softeners

 

OPERATION:

Connect the probe to the brine suction line of your softener (using the appropriate adapters). Check how many liters of resin are contained in your softener (see softener instruction manual). Make sure that the electric plug of our generator is disconnected. On the generator there is a trimmer that regulates clockwise from 1 to 70 minutes of timer. Each programmed minute is able to disinfect 1 liter of resin. The system is ready to operate.

How does it work:

during regeneration the softener sucks the brine, the system senses the passage of brine and activates the electrolysis of NaCl for the time set directly on the probe. At the end of this time, the generator is silent for 4 hours (ignores any brine passage). After 4 hours the system is ready to be able to disinfect the resins again. The green led indicates system in tension, the yellow led indicates system in disinfection.

** THE PICTURE SHOWS THE 2 VERSIONS (DEPENDING ON AVAILABILITY)

Accessories