-
Water Treatment
- Water Softeners
- Water Purifiers, Refrigerators, Carbonators
- Accessories and Components for Water Purifiers
-
Water Filters and Components
- Bayonet Water Filters
- Bayonet water filters mixed connection
- Brackets for Housings Containers
- Containers for Filters and Membranes
- Containers for Filters drop-in
- Filtering masses
- Filters and Descaling Systems
- Filters for Bottles
- Filters for Carafes
- Filters for On-Tap
- Filters for osmosis containers
- Keys for Housings Containers
- Line Water Filters
- Osmotic Membranes
- Refillable cartridges
- Sand filter filters for irrigation
- Water Filter Heads
- Water Filters Drop in
- Hydraulic fittings
- Taps and Columns for Water Purifiers
- Co2 Gas Cylinders and Pressure Reducers
- Manual and portable water gas
- Waste treatment
- Beer - Home / Pub
- Christmas Lights and Decorations
- Garden and Outdoors
- Entertainment and Leisure
- Original Gift Ideas and Gadgets
- OUTLET Warehouse
Dakota ForHome® water softener 12 lt. Resin Cabinet with Valve Dakota 660S Automatic Volume-Time
Electronic programmer that allows you to put the device into operation quickly and easily.
New generation softeners with volumetric valve. The system consists of a GRP cylinder and a polyethylene body. Dakota 959D valve with delayed regeneration and mixer valve to adjust the hardness at the outlet. By-pass for installation included. Four different regenerations: Timed chronometric - after the number of days programmed, Immediate volumetric - upon passage of a certain amount of water, Delayed volumetric - from the volume of water to the programmed time, Mixed volumetric - similar to delayed regeneration, but allows you to program a safety regeneration after the number of days programmed. CE, NSF, D.M. 25, D.M. 174.
Hardness in water (limestone)
Expressed in ° F (French degrees), it can be measured with the drops of Titrant, which is important for determining the choice of the type of softener and optimizing salt consumption.
Exchange capacity
Hardness that the softener is able to retain.
slim 7 Liters resin: 22ºHFxm3 * slim 12 Liters resin: 49ºHFxm3 * 12.5 Liters resin: 49ºHFxm3 * slim 18 Liters resin: 97ºHFxm3 * 18 Liters resin: 97ºHFxm3 * 30 Liters resin: 170ºHFxm3.
Calculation example to determine the correct item
A 30 liter resin water softener with a hardness of 40 ° F (medium-high hardness), develops 4.250 liters of softened water (170: 40 = 4.250). In this case it is necessary to program 4,250m3 in the treatment capacity of the softener using the keys on the display and the softener delivers water without limescale at zero French degrees.
Hardness adjustment at the outlet
It is recommended not to dispense completely softened water in domestic installations. Dakota softeners have an integrated residual hardness regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness it is necessary to gently open the MIX valve regulator. All softeners are supplied with this valve completely closed and therefore will deliver water at 0 ° F. For water intended for human consumption, a residual hardness of between 5 and 10ºF for copper pipes and between 8 and 10ºF for iron pipes is recommended. Depending on the programmed output hardness, the softener will tend to produce more softened water and less salt consumption because the input hardness must be compensated with the output value. A 30 liter resin water softener with an inlet hardness of 40 ° F and a 5 ° F outlet hardness, develops 4,857 liters of softened water (170: 35 = 4,857). In this case it is necessary to program 4.9m3 in the treatment capacity of the softener using the keys on the display. On average, a person consumes 150 liters of water a day and a timed regeneration is recommended every 4/5 days, so a family of 4 with water at 40 ° F consumes x 5 days. 3,000 liters, therefore a 30-liter water softener with a scheduled regeneration even at 6 days. can be installed.
Benefits and advantages
Reduction of water hardness, which causes encrustations. ENERGY SAVING: the device prevents the formation of encrustations in the pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased service life of household appliances and boilers. ECONOMIC SAVINGS: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the softener.
Features
* Min pressure: 2.5 bar (2.5 kg / cm2)
* Max pressure: 8 bar (8 kg / cm2)
* Min temperature: 4 ° C
* Max temperature: 35 ° C
* Water inlet / outlet 1 "M. (30lt.), 3/4" M. (slim 7, slim 12, 12.5, slim 18, 18lt.)
Model specifications add-dakota-12-vol 12lt. resin. (suitable for 2/3 people)
* Salt consumption for regeneration: 1 Kg / salt.
* Water consumption for regeneration: 60 lt.
* Quantity of treated water for regeneration, 35 ° F-1,400m3, 40 ° F-1,225m3, 45 ° F-1,088m3, 50 ° F-0,980m3, 60 ° F-0,816m3.
* Working flow rate 0.5 m3 / h
* Max. 0.7 m3 / h
* Dimensions mm (HxLxP) 775 x 230 x 475
* Salt container: 15 Kg
Warnings
We recommend the use of the chlorine producer for the automatic sanitization of the resins at each regeneration. In Italy it is recommended by law for other countries such as France, Germany, Austria, it is not provided. (See code - 15000407).
Furthermore, to protect the system and the entire plant from pebbles and various suspended sediments, the installation of a Housing with a wire-wound polypropylene cartridge inside with a filtering density of 50 microns or higher is recommended. (see code - 02001014 Vessel container + code 04001002-05 filter 50 micron)
ACCESSORIES INCLUDED:
- Cabinet softener
- By-pass valve
- Fittings
- Instruction booklet
RECOMMENDED ACCESSORIES (SEE ACCESSORIES):
- cod. 15000407: CHLORINE PRODUCER (if ordered together with the softener it is already assembled)
- cod. 02001014: VESSEL KIT FOR SEDIMENT FILTER
- code 04001002-05: 50 MICRON SEDIMENT FILTER
- cod. 13000001 - TITRANT FOR HARDNESS SETTING
* Softeners are supplied without salt, the use of salt tablets is recommended.
Dakota ForHome® water softener 12 lt. Resin Cabinet with Valve Dakota 660S Automatic Volume-Time
Electronic programmer that allows you to put the device into operation quickly and easily.
New generation softeners with volumetric valve. The system consists of a GRP cylinder and a polyethylene body. Dakota 959D valve with delayed regeneration and mixer valve to adjust the hardness at the outlet. By-pass for installation included. Four different regenerations: Timed chronometric - after the number of days programmed, Immediate volumetric - upon passage of a certain amount of water, Delayed volumetric - from the volume of water to the programmed time, Mixed volumetric - similar to delayed regeneration, but allows you to program a safety regeneration after the number of days programmed. CE, NSF, D.M. 25, D.M. 174.
Hardness in water (limestone)
Expressed in ° F (French degrees), it can be measured with the drops of Titrant, which is important for determining the choice of the type of softener and optimizing salt consumption.
Exchange capacity
Hardness that the softener is able to retain.
slim 7 Liters resin: 22ºHFxm3 * slim 12 Liters resin: 49ºHFxm3 * 12.5 Liters resin: 49ºHFxm3 * slim 18 Liters resin: 97ºHFxm3 * 18 Liters resin: 97ºHFxm3 * 30 Liters resin: 170ºHFxm3.
Calculation example to determine the correct item
A 30 liter resin water softener with a hardness of 40 ° F (medium-high hardness), develops 4.250 liters of softened water (170: 40 = 4.250). In this case it is necessary to program 4,250m3 in the treatment capacity of the softener using the keys on the display and the softener delivers water without limescale at zero French degrees.
Hardness adjustment at the outlet
It is recommended not to dispense completely softened water in domestic installations. Dakota softeners have an integrated residual hardness regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness it is necessary to gently open the MIX valve regulator. All softeners are supplied with this valve completely closed and therefore will deliver water at 0 ° F. For water intended for human consumption, a residual hardness of between 5 and 10ºF for copper pipes and between 8 and 10ºF for iron pipes is recommended. Depending on the programmed output hardness, the softener will tend to produce more softened water and less salt consumption because the input hardness must be compensated with the output value. A 30 liter resin water softener with an inlet hardness of 40 ° F and a 5 ° F outlet hardness, develops 4,857 liters of softened water (170: 35 = 4,857). In this case it is necessary to program 4.9m3 in the treatment capacity of the softener using the keys on the display. On average, a person consumes 150 liters of water a day and a timed regeneration is recommended every 4/5 days, so a family of 4 with water at 40 ° F consumes x 5 days. 3,000 liters, therefore a 30-liter water softener with a scheduled regeneration even at 6 days. can be installed.
Benefits and advantages
Reduction of water hardness, which causes encrustations. ENERGY SAVING: the device prevents the formation of encrustations in the pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased service life of household appliances and boilers. ECONOMIC SAVINGS: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the softener.
Features
* Min pressure: 2.5 bar (2.5 kg / cm2)
* Max pressure: 8 bar (8 kg / cm2)
* Min temperature: 4 ° C
* Max temperature: 35 ° C
* Water inlet / outlet 1 "M. (30lt.), 3/4" M. (slim 7, slim 12, 12.5, slim 18, 18lt.)
Model specifications add-dakota-12-vol 12lt. resin. (suitable for 2/3 people)
* Salt consumption for regeneration: 1 Kg / salt.
* Water consumption for regeneration: 60 lt.
* Quantity of treated water for regeneration, 35 ° F-1,400m3, 40 ° F-1,225m3, 45 ° F-1,088m3, 50 ° F-0,980m3, 60 ° F-0,816m3.
* Working flow rate 0.5 m3 / h
* Max. 0.7 m3 / h
* Dimensions mm (HxLxP) 775 x 230 x 475
* Salt container: 15 Kg
Warnings
We recommend the use of the chlorine producer for the automatic sanitization of the resins at each regeneration. In Italy it is recommended by law for other countries such as France, Germany, Austria, it is not provided. (See code - 15000407).
Furthermore, to protect the system and the entire plant from pebbles and various suspended sediments, the installation of a Housing with a wire-wound polypropylene cartridge inside with a filtering density of 50 microns or higher is recommended. (see code - 02001014 Vessel container + code 04001002-05 filter 50 micron)
ACCESSORIES INCLUDED:
- Cabinet softener
- By-pass valve
- Fittings
- Instruction booklet
RECOMMENDED ACCESSORIES (SEE ACCESSORIES):
- cod. 15000407: CHLORINE PRODUCER (if ordered together with the softener it is already assembled)
- cod. 02001014: VESSEL KIT FOR SEDIMENT FILTER
- code 04001002-05: 50 MICRON SEDIMENT FILTER
- cod. 13000001 - TITRANT FOR HARDNESS SETTING
* Softeners are supplied without salt, the use of salt tablets is recommended.