Crystal Right CR100 zeolite crystals
For technological use only.
Rate per liter.
Crystal-Right ™ removes non-oxidized iron, manganese and hardness from water in one step. Crystal-Right ™ silica crystals are a natural choice for water treatment plants. No other product has comparable effectiveness in treating water in one step.
These zeolitic crystals derive from aluminum and sodium silicates carefully produced and treated by Mineral-Right using an exclusive technology. Thanks to their unique crystalline structure, Crystal-Right ™ crystals eliminate hardness, non-oxidized iron, manganese with excellent results and at the same time increase the pH of the acidic water.
Unlike spherical resin granules, Crystal-Right ™ crystals provide better filtration and are thoroughly cleaned during backwashing faster than common resins, with no product loss.
Evaluate the many benefits of a single-pass single-system product that sets new industry standards day after day. Your resellers and customers will be very impressed.
Crystal-Right ™ silica crystals can help you build a better water treatment system:
• Eliminate non-oxidized iron, manganese and hardness in one step;
• The CR 100 version eliminates or reduces ammonium in the water (max speed 10m / h);
• They increase the pH of acidic water;
• Regeneration is achieved using 30% less salt (NaCl) than using standard softening resins;
• Contrary to standard resins, chlorine has no negative effects on the functioning of the CR and it is advisable to chlorinate the brine during regeneration to stop the proliferation of bacteria;
• Provide superior filtration of sediments and other impurities that cloud the water;
• The chlorination of the Crystal-Right ™ crystals sanitizes the bed and maintains a residual chlorine that eliminates the microbial load;
• If properly used, Crystal-Right has a life span of about 10 years;
• They can be chlorinated without causing crushing or product damage;
• Packaged in convenient 28 l bags.
Regeneration program suggested
28 LITERS of Crystal-Right
• pH range: 6+ (CR100); 7+ (CR200);
• Total non-oxidized iron and manganese: 8 mg / l
• Hardness range: 5-68 ° F (CR100); 5-137 ° F (CR200);
• Backwashing: 14 min.
• Brine and Rinse: 72 min.
• Brine suction: 1,5 lt
• Backwash: 15 min.
• Tank dimensions: 25x112 cm - 10x44 "
42 LITERS of Crystal-Right
• pH range: 5+ (CR100); 7+ (CR200);
• Total non-oxidized iron and manganese: 10 mg / l
• Hardness range: 5-68 ° F (CR100); 5-137 ° F (CR200);
• Backwashing: 14 min.
• Brine and Rinse: 90 min.
• Brine suction: 1,5 lt
• Backwash: 15 min.
• Tank dimensions: 25x137 cm - 10x54 "
71 LITERS of Crystal-Right
• pH range: 5+ (CR100); 7+ (CR200);
• Total non-oxidized iron and manganese: 15 mg / l
• Hardness range: 5-68 ° F (CR100); 5-137 ° F (CR200);
• Backwashing: 14 min.
• Brine and Rinse: 90 min.
• Brine suction: 3.0 lt
• Backwash: 27 min. (CR100); 23 min. (CR200);
• Tank dimensions: 33x137 cm - 13x54 "
To use the crystals, the following characteristics are required:
• Minimum water hardness of 5 ° F
• TDS (Total Dissolved Solids) minimum of 80 mg / l
• Counter-current washing flow rate between 17 and 24 m / h
Crystal-Right ™ 100 silica crystals (Code 15515602-CR 100)
They eliminate hardness, non-oxidized iron, manganese and increase the pH
Crystal-Right ™ 200 silica crystals (Code 15515602-CR 200)
Maximum capacity to eliminate hardness, non-oxidized iron and manganese
