-
Water Treatment
- Water Softeners
- Water Purifiers, Refrigerators, Carbonators
- Accessories and Components for Water Purifiers
-
Water Filters and Components
- Bayonet Water Filters
- Bayonet water filters mixed connection
- Brackets for Housings Containers
- Containers for Filters and Membranes
- Containers for Filters drop-in
- Filtering masses
- Filters and Descaling Systems
- Filters for Bottles
- Filters for Carafes
- Filters for On-Tap
- Filters for osmosis containers
- Keys for Housings Containers
- Line Water Filters
- Osmotic Membranes
- Refillable cartridges
- Sand filter filters for irrigation
- Water Filter Heads
- Water Filters Drop in
- Hydraulic fittings
- Taps and Columns for Water Purifiers
- Co2 Gas Cylinders and Pressure Reducers
- Manual and portable water gas
- Waste treatment
- Beer - Home / Pub
- Christmas Lights and Decorations
- Garden and Outdoors
- Entertainment and Leisure
- Original Gift Ideas and Gadgets
- OUTLET Warehouse
Intex 29083 Spiral Hose for Pools of 7.6 m with 38mm vacuum connection
Diameter 38 mm. Dimensions: 7.6 m. Lightweight and flexible.
Suitable for all swimming pools and INTEX filtration systems. Luxury vacuum cleaner hose
Note: If the tubing is too long for its intended use, it can be shortened (cut) as follows: In a "clockwise motion", unscrew / remove one (1) "white nozzle" of the tubing. Measure and cut the tube to the desired length (keep the part of the tube with the other white cap attached). With a "counterclockwise movement", screw / refit the "white end fitting" to the pipe.
Attention: If there is a leak between the blue tube and the "white tube", the consumer can check the following: 1. Make sure that the "white tube" is tight. 2. To tighten the white end fitting to the blue tube, turn the end fitting “counterclockwise” by hand only.
Intex 29083 Spiral Hose for Pools of 7.6 m with 38mm vacuum connection
Diameter 38 mm. Dimensions: 7.6 m. Lightweight and flexible.
Suitable for all swimming pools and INTEX filtration systems. Luxury vacuum cleaner hose
Note: If the tubing is too long for its intended use, it can be shortened (cut) as follows: In a "clockwise motion", unscrew / remove one (1) "white nozzle" of the tubing. Measure and cut the tube to the desired length (keep the part of the tube with the other white cap attached). With a "counterclockwise movement", screw / refit the "white end fitting" to the pipe.
Attention: If there is a leak between the blue tube and the "white tube", the consumer can check the following: 1. Make sure that the "white tube" is tight. 2. To tighten the white end fitting to the blue tube, turn the end fitting “counterclockwise” by hand only.