AUTOTROL 255/760 Logix 1 "electronic double body water softener Rig.Volume-time 30 liters resin
Automatic water softening device. Autotrol 255/760 valve regeneration Volume / time. Valve body in Noryl plastic material, NSF listed. Programming is quick and easy, time insertion, day of the week insertion, regeneration time, generally 02.00 at night, number of days between regenerations and hardness at entry. Complete with 12 / 230V - 50Hz power supply socket. European plug.
Output hardness regulator. Tightening the adjustment screw will open the by-pas clapet, which will allow you to mix the raw water with that treated by the appliance. On the first crackdown, the hardness of the outgoing water increases. An output hardness of around 15 ° F is recommended, however the most frequently used setting is not less than 5 ° F. Loosening the adjustment screw will allow the by-pass clapet to close. The closing action will reduce mixing with raw water at the outlet. To mix a specific output hardness value, adjust the screw and test the water. Repeat the procedure until the desired hardness value is reached. To check the input / output hardness of the device, we recommend purchasing the code. 13000001 Titrant Total hardness kit (1 ° F) single reagent 15cc.
* The softeners are supplied without salt, the use of salt in tablets is recommended.
* The cylinders are supplied full up to the 40lt version and with the valve already mounted. For higher versions, all components must be assembled by specialized personnel.
A bypass valve system will need to be installed on all systems. The bypass valves isolate the appliance from the water system and allow the use of untreated water. Routine maintenance or assistance may also require that the system be bypassed.
Benefits and advantages
Reduction of the hardness of the water, which is the cause of scale. ENERGY SAVING: the device prevents the formation of incrustations in the pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased life span of household appliances and boilers. ECONOMIC SAVINGS: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. All you need to worry about is adding salt to the softener.
* Min pressure: 1.38bar (1.38kg / cm2)
* Max pressure: 8.27bar (8.27kg / cm2)
* Min temperature: 2 ° C
* Max temperature: 38 ° C
* Water inlet / outlet 1 "female thread
* Drain: hose connection with 2mt. of tube
* Overflow: 3/8 "hose connector
Specifications of the model 30lt. resin. (suitable for 6/8/10 people)
* Exchange capacity: 160ºHFxm3.
* Salt consumption for regeneration: 4.3 Kg./salt.
* Water consumption for regeneration: 201lt.
* Quantity of water treated for regeneration, 30 ° F-5.33m3, 35 ° F-4.5m3, 40 ° F-4m3, 45 ° F-3.55m3, 50 ° F-3.2m3, 60 ° F- 2,66m3.
* Max. Flow rate 1,47m3 / h
- BYPASS + CONNECTORS
ACCESSORIES NOT INCLUDED TO BE PURCHASED SEPARATELY (SEE ACCESSORIES):
- CHLORINE PRODUCER
- VESSEL WITH SEDIMENO FILTER
- TITRANT FOR HARDNESS SETTING