IN-OUT 1/2 "BSP male anti-flooding system, plastic solenoid valve

IN-OUT 1/2 "BSP male anti-flooding system, plastic solenoid valve

Features:

* Automatic blocking of water flow upon electronic sensor detection

* Works with a 9v battery.

* Automatic flow lock when the battery is completely discharged

* Easy installation

* Protection for water filters and softeners.

Specifications:

* Working voltage: 9V DC

* Supply current: typical 1.0mA, maximum 15.0mA.

* Cable length: 1.5m of cable to the solenoid valve

* Leak Detection Method: The control unit must be grounded under or near the filter with the metal sensor facing ground and the display facing up.

* Operating temperature: -20 ~ 80 ° C.

* Maximum pressure AS-414: 6 Bar

Instructions for use

Installation:

1-Install the solenoid valve on the main water inlet line of the system.

Work reset:

2-Hold the button down for 4 seconds, the control unit opens the inlet solenoid valve to let the water flow into the system and the control unit generates a long "Beep" sound.

3-Blockage of the unit when a water leak is detected.

The control unit closes the inlet solenoid valve generating a continuous "Beep-Beep" sound and a consequent flashing of the blue LED on the front. Once the problem has been solved, keep the button pressed for 4 seconds and the control unit opens the solenoid valve again and then the water begins to flow back into the system.

4-Red battery led.

Before shutting down completely, the system gives a low battery alarm. If it is not replaced, the system goes into protective lockout and resets again when replaced with a charge.