Water softener ForHome® Cab112 Autotrol 14 lt. Resin Cabinet Valve 368 3/4 "Volume-Time Monospheric resin
This is an elegantly designed water softener that provides you with luxury feeling water. It decreases the unpleasant limestone around the tub and sink. It will save you money on your heating bill and reduce the consumption of all detergents and cleaning products. The water pipes will always be clean and free from scale, clogging and damage. Throughout the water circuit there will be no more pressure / pressure losses or less water flows.
Efficient and low environmental impact (Carbon Neutral)
The Peanut 368 softener has shown that it can save up to 24% of the cost of the heating system. The new Peanut 368 softener has been specifically designed with a good aesthetic design. Composed of a compact and elegant casing that covers all the exposed parts, but above all it keeps everything clean and tidy. Peanut 368 is one of the very few softeners available that can be defined as having a low environmental impact (definition given by Energy Saving). 50% savings on soap and detergent, to extend the life of your clothes by up to 15% more. (1)
(1) Independent study carried out by the Water Quality Association, 2010
Salt in tablets or in blocks
You can use both. In the case of block rooms, block support must be requested upon purchase.
Features
• Dimensions in cm (HxLxP) 50.7x28.2x44
• Resin liters: 14
• Resin: Monospheric.
• Power supply: 230V-50Hz / 12V (transformer included) European plug
• Min pressure: 1,8bar (1,8kg / cm2)
• Max pressure: 8bar (8kg / cm2)
• Nominal flow rate: 0.8m3 / h
• Max flow rate: 1.1m3 / h
• Reserve: fixed reserve with immediate or delayed regeneration (programmable)
• Number of regeneration cycles: 5
• Regeneration type: Co-current
• Cylinder: 10 "x16"
• Min temperature: 2 ° C
• Max temperature: 35 ° C
• Max ambient temperature: 45 ° C
• Average number of days between regenerations: 4 days (2) max 30 days.
• Energy consumption: generally 1 watt
(meets the requirements for water efficiency as defined by the Code for Sustainable Homes)
(2) based on a family of 4 with 125 liters / person in an area where the water is hard 300ppm.
Installation data
• Inlet / Outlet: 3/4 "male thread
• Drain: 1/2 "male hose connector (Male tube to hose elbow OD stem 1/2")
• Brine connection: 3/8 "compression
• Norylon by-pass included
Specifications of the CAB112-02 14lt model. Monospheric resin. (suitable for 3/4 people)
• Interchange capacity: 84ºHFxm3.
• Salt consumption for regeneration: 1.89 Kg./salt.
• Water consumption for regeneration: 100lt.
• Quantity of treated water for regeneration, 30 ° F-2.8m3, 35 ° F-2.4m3, 40 ° F-2.1m3, 45 ° F-1.86m3, 50 ° F-1.68m3, 60 ° F -1,4m3.
Warnings
We recommend the use of the chlorine manufacturer for the automatic sanitization of the resins at each regeneration. In Italy it is recommended by law for other countries such as France, Germany, Austria, it is not foreseen. (See code - 15000407).
Furthermore, to safeguard the system and the entire system from pebbles and various sediments in suspension, the installation of a housing with cartridge inside in wire-wrapped polypropylene with a filtering density of 50 microns or higher is recommended. (see code - 02001014 Vessel container + code 04001002-05 50 micron filter)
INCLUDED ACCESSORIES:
- Cabin softener
- By-pass valve
- Fittings
- Instruction booklet
RECOMMENDED ACCESSORIES (SEE ACCESSORIES):
- code 15000407: CHLORINE PRODUCER (if ordered together with the softener it is already mounted)
- code 02001014: VESSEL KIT FOR SEDIMENT FILTER
- code 04001002-05: 50 MICRON SEDIMENT FILTER
- code 13000001 - TITRANT FOR HARDNESS SETTING
* The softeners are supplied without salt, the use of salt in tablets is recommended.
